BenQ MW820ST Manual de usuario Pagina 52

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 64
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 51
Maintenance52
14. Connect the power and restart the projector.
Do not turn the power on with the lamp cover removed.
Resetting the lamp timer
15. After the startup logo, open the On-Screen Display (OSD) menu. Go to the
SYSTEM SETUP: Advanced > Lamp Settings menu. Press MODE/ENTER.
The Lamp Settings page displays. Highlight Reset Lamp Timer. A warning
message is displayed asking if you want to reset the lamp timer. Highlight Reset and
press MODE/ENTER. The lamp time will be reset to “0”.
Do not reset if the lamp is not new or replaced as this could cause damage.
13. Tighten the screw(s) that secures the lamp
cover.
Loose screw may cause a bad connection, which could
result in malfunction.
Do not over tighten the screw.
Vista de pagina 51
1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 63 64

Comentarios a estos manuales

Sin comentarios