BenQ DLP Manual de usuario descargar pdf (Pagina 45)

Maintenance 39

5. Loosen the screw that secures the lamp.

6. Pull the lamp from the projector.

• Pulling it too quickly may cause the lamp to break

and scatter broken glass in the projector.

• Do not place the lamp in locations where water

might splash on it, children can reach it, or near

flammable materials.

• Do not insert your hands into the projector after

the lamp is removed. If you touch the optical

components inside, it could cause color

unevenness and distortion of the projected

images.

7. As shown in the figure, hold the new lamp and

align the two locators on the lamp with the

holes on the projector, and then pull the lamp

all the way into the projector.

8. Connect the lamp connector to the projector.

9. Tighten the screw that secures the lamp.

• Loose screw may cause a bad connection, which

could result in malfunction.

• Do not over tighten the screw.

Downloaded From projector-manual.com BenQ Manuals

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 54 55

Sin comentarios

BenQ DLP Manual de usuario Pagina 45