BenQ W710ST Manual de usuario descargar pdf (Pagina 40)

Operation40

English

3D Color Management

In most installation situations, color management will not be necessary, such as in

classroom, meeting room, or lounge room situations where lights remain on, or where

building external windows allow daylight into the room.

Only in permanent installations with controlled lighting levels such as boardrooms, lecture

ters, or home theaters, should color management be considered. Color management

provides fine color control adjustment to allow for more accurate color reproduction, should

you require it.

Proper color management can only be achieved under controlled and reproducible viewing

itions. You will need to use a colorimeter (color light meter), and provide a set of

suitable source images to measure color reproduction. These tools are not provided with the

projector, however, your projector supplier should be able to provide you with suitable

guidance, or even an experienced professional installer.

The Color Management provides six sets (RGBCMY) of colors to be adjusted. When you

lect each color, you can independently adjust its range and saturation according to your

preference.

If you have purchased a test disc which contains various color test patterns and can be used

test the color presentation on monitors, TVs, projectors, etc. You can project any image

from the disc on the screen and enter the 3D Color Management menu to make

adjustments.

To adjust the settings:

1. Go to the PI

CTURE men

u and highlight 3D Color Management.

2. Press MOD

E/ENTER and the 3D Color Management page displays.

3. Highlight Primar

y color and press / to select a color from among Red, Green,

Blue, Cyan, Magenta and Yellow.

4. Press

to highlight Hue and press / to select its range. Increase in the range

will include colors consisted of more proportions of its two adjacent colors.

Please refer to the illustration to the right for

how t

he colors relate to each other.

RED

BLUE

GREEN

Yellow

Cyan

Magenta

For example, if you select Red and set its

range at 0, only pure red in the projected

picture will be selected. Increasing its range

will include red close to yellow and red close

to magenta.

5. Press

to highlight Saturation and adjust

its values to your preference by pressing

. Every adjustment made will reflect to the

image immediately.

For example, if you select Red and set its

value a

t 0, only the saturation of pure red will be affected.

6. Press

to highlight Gain and adjust its values to your preference by pressing / .

The contrast level of the primary color you select will be affected. Every adjustment

made wil

l reflect to the image immediately.

7. Repeat steps 3 to 6 for other color adjustments.

8. Make sure you have made all of the desired adjustments.

9. Press MENU/

XIT to exit and save the settings.

Saturation is the amount of that color in a video picture. Lower settings produce less

saturated colors; a setting of “0” removes that color from the image entirely. If the saturation

is too high, that color will be overpowering and unrealistic.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 68 69

Comentarios a estos manuales

Sin comentarios

BenQ W710ST Manual de usuario Pagina 40

Comentarios a estos manuales

Relacionado con productos y manuales para Proyectores de datos BenQ W710ST