BenQ W703D Manual de usuario descargar pdf (Pagina 58)

Maintenance58

English

10. Restart the projector.

Do not turn the power on with the lamp cover removed.

5. Lift the handle so that it stands up. Use

the handle to slowly pull the lamp out of

the projector.

• Pulling it too quickly may cause the lamp

to break and scatter broken glass in the

projector.

• Do not place the lamp in locations where

water might splash on it, children can

reach it, or near flammable materials.

• Do not insert your hands into the projector

after the lamp is removed. If you touch the

optical components inside, it could cause

color unevenness and distortion of the

projected images.

6. Insert the new lamp into the lamp

compartment and make sure it fits in

the projector.

• Ensure the connectors are aligned.

• If you experience resistance, lift the lamp

and start again.

7. Tighten the screws that secure the lamp.

8. Ensure the handle is fully laid flat and

cked in place.

• Loose screw may cause a bad connection,

which could result in malfunction.

• Do not over tighten the screw.

9. Replace the lamp compartment cover

on the projector and tighten the captive

rew.

BenQ W703D.book Page 58 Friday, November 25, 2011 9:49 AM

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 71 72

Sin comentarios

BenQ W703D Manual de usuario Pagina 58