BenQ W1350 Manual de usuario descargar pdf (Pagina 39)

Menu Functions 39

Basic OSD menu - without input signals

connected

As there’s no input signal to your projector, only the submenus of Settings under Basic

OSD menu - with input signals connected are available. Menu options that are not available

will become grayed out.

To access the OSD menu, press MENU on the projector or remote control.

•Use the arrow keys (▲/▼/◄/►) on the projector or remote control to move through

the menu items.

•Use OK to confirm the selected menu item.

To switch from the Basic OSD menu to the Advanced OSD menu, see "About the OSD Menus"

on page 34.

Menu Submenus and Descriptions

Language Sets the language for the On-Screen Display (OSD) menus.

Projector Position

The projector can be installed on a ceiling or behind a screen, or with

one or more mirrors. See "Choosing a location" on page 17 for details.

Test Pattern

Enables this function to display the grid test pattern, which helps you

adjust the image size and focus so as to check if the projected image is

free of distortion.

Auto Source

Sets whether the projector searches automatically for input sources.

Select On to enable the projector to scan for input sources until it

acquires a signal. If the function is set to Off, the projector selects the

last used input source.

Menu Type Switches to the Advanced OSD menu.

HDMI Format

Selects an input source type for the HDMI signal. You can also manually

select the source type. The different source types carry different

standards for the brightness level.

HDMI Format is only available when the HDMI signal is selected.

Reset Lamp Timer

Activates this function only after a new lamp is installed. When you select

Reset, a "Reset Successfully" message displays to notify that the lamp

time has been reset to "0".

Reset All Settings

Returns all settings to the factory preset values.

The following settings will still remain: Keystone, Language,

Projector Position, and Reset Lamp Timer.

Information

Displays the following information about your projector.

• Source: Displays the current signal source.

• Picture Mode: Displays the current Picture Mode.

• Resolution: Displays the native resolution of the input source.

• Color System: Displays input system format.

• Equivalent Lamp Hour: Displays the number of hours the lamp

has been used.

• 3D Format: Displays the current 3D mode.

3D Format is only available when 3D Mode is enabled.

• Firmware Version: Displays the firmware version of your

projector.

Some information is given only when certain input sources are in

use.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 76 77

Comentarios a estos manuales

Sin comentarios

BenQ W1350 Manual de usuario Pagina 39

Comentarios a estos manuales

Relacionado con productos y manuales para Proyectores de datos BenQ W1350