BenQ W1350 Manual de usuario descargar pdf (Pagina 30)

Operation30

Operation

Starting up the projector

1. Plug the power cord into the projector and into

a wall socket. Turn on the wall socket switch

(where fitted). Check that the POWER

indicator light on the projector lights orange

after power has been applied.

Please use the original accessories (e.g. power cable)

only with the device to avoid possible dangers such as

electric shock and fire.

2. Press POWER on the projector or remote control to start the projector

and a start up tone sounds. The POWER indicator light flashes green and stays

green when the projector is on.

The fans starts operating, and a start-up image display on the screen while it warms

up. The projector does not respond to further commands whiles it is warm up.

(If necessary) Rotate the focus ring to adjust the image clearness.

To turn off the ring tone, see "Power On/Off Ring Tone" on page 59 for details.

If the projector is still hot from previous activity, it will run the cooling fan for approximately 90

seconds before energizing the lamp.

3. If this is the first time you turn on the projector, the setup wizard appears to guide

you through setting up the projector. If you have already done this, skip this step and

move on to step 5.

• Use the arrow keys (▲/▼/◄/►) on the projector or remote control to move

through the menu items.

• Use OK to confirm the selected menu item.

The Setup Wizard screenshots below are for reference only and may differ from the actual

design.

i. Specify Projector Position.

For more information about

projector position, see "Choosing a

location" on page 17.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 76 77

Sin comentarios

BenQ W1350 Manual de usuario Pagina 30