BenQ MW665 Manual de usuario Pagina 54

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 67
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 53
Maintenance54
Lamp information
Getting to know the lamp hour
When the projector is in operation, the duration (in hours) of lamp usage is automatically
calculated by the built-in timer.
To obtain the lamp hour information:
1. Press MENU/EXIT and then press / to highlight the SYSTEM SETUP:
Advanced menu.
2. Press to highlight Lamp Settings and press MODE/ENTER. The Lamp
Settings page displays.
3. You will see the Equivalent Lamp Hour information displaying on the menu.
4. To leave the menu, press MENU/EXIT.
You can also get the lamp hour information on the INFORMATION menu.
Extending lamp life
The projection lamp is a consumable item that normally can last up to 3000-4000 hours
with proper usage. To keep the lamp life as long as possible, you can do the following
settings via the OSD menu.
Setting the Lamp Mode
Setting the projector in Economic, SmartEco, LampSave or LumenCare mode
extends the lamp operation life. To set Economic, SmartEco, LampSave or
LumenCare mode, go into the SYSTEM SETUP: Advanced > Lamp Settings >
Lamp Mode menu and press / .
Setting Auto Power Off
This function allows the projector to turn off automatically if no input signal is detected
after a set period of time to prevent unnecessary waste of lamp life.
To s e t Auto Power Off, go into the SYSTEM SETUP: Basic > Operation Settings
> Auto Power Off menu and press / . If the preset time lengths are not suitable for
your presentation, select Disable. The projector will not automatically shut down in a
certain time period.
Lamp mode Description
Normal
Provides full lamp brightness
Economic
Lowers brightness to extend the lamp life and decreases the fan
noise
SmartEco
Adjusts the lamp power automatically depending on the content
brightness level
LampSave
Adjusts the lamp power automatically and lowers the brightness to
extend the lamp life
LumenCare
Keeps the image brightness constant without losing too much
brightness after long-term usage
Downloaded From projector-manual.com BenQ Manuals
Vista de pagina 53
1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 66 67

Comentarios a estos manuales

Sin comentarios