BenQ MP771 - XGA DLP Projector Manual de usuario descargar pdf (Pagina 58)

Maintenance58

11. Restart the projector.

Do not turn the power on with the lamp cover removed.

Resetting the lamp timer

12. After the startup logo, open the On-Screen

Display (OSD) menu. Go to the SYSTEM

SETUP: Advanced > Lamp Settings menu.

Press Mode/enter on the projector or ENTER

on the remote control. The Lamp Settings

page displays. Highlight Reset Lamp Timer. A

warning message displays asking if you want

to reset the lamp timer. Highlight Reset and press Mode/enter on the projector or

ENTER on the remote control. The lamp time will be reset to '0'.

Do not reset if the lamp is not new or replaced as this could cause damage.

9. Replace the lamp cover on the projector.

10. Use a coin to turn the screw clockwise until the

lamp cover is secured.

• Loose screw may cause a bad connection, which

could result in malfunction.

• Do not over tighten the screw.

Reset Lamp Timer?

Reset

Cancel

Notice

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 64 65 66

Sin comentarios

BenQ MP771 - XGA DLP Projector Manual de usuario Pagina 58