BenQ MP623 - XGA DLP Projector Manual de usuario descargar pdf (Pagina 53)

Maintenance 53

5. Lift the handle so that it stands up. Use the

handle to slowly pull the lamp out of the

projector.

• Pulling it too quickly may cause the lamp to break and

scatter broken glass in the projector.

• Do not place the lamp in locations where water might

splash on it, children can reach it, or near flammable

materials.

• Do not insert your hands into the projector after the

lamp is removed. If you touch the optical components

inside, it could cause color unevenness and distortion

of the projected images.

6. As shown in the figure, lower the new lamp

first into the connector on the projector and

align the two holes on the projector.

7. Tighten the screw that secures the lamp.

• Loose screw may cause a bad connection, which

could result in malfunction.

• Do not over tighten the screw.

8. Ensure the handle is fully laid flat and locked in

place.

9. Replace the lamp cover on the projector.

10. Tighten the screw that secures the lamp cover.

• Loose screw may cause a bad connection, which

could result in malfunction.

• Do not over tighten the screw.

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 61 62

Sin comentarios

BenQ MP623 - XGA DLP Projector Manual de usuario Pagina 53