BenQ Joybee GP2 Manual de usuario descargar pdf (Pagina 29)

Operation

Starting up the projector

1. Connect the power using the AC adapter. The Power LED indicator turns into blue

and flashes slowly.

2. Press Power on the projector or remote

control to start the projector. The Power, OK

and Ring LED indicators light blue when the

projector is on.

The start up procedure takes several seconds.

In the later stage of start up, a startup logo is

projected.

(If necessary) Rotate the focus ring to adjust

the image clearness.

3. If the projector is activated for the first time, select your OSD language following the

onscreen instructions.

4. If you are prompted for a password, press the

arrow keys to enter a six digit password. See

"Utilizing the password function" on page 32

for details.

5. Switch all of the connected equipment on.

6. The projector will display the home screen.

If the frequency/resolution of the input signal exceeds

the projector's operating range, you will see the

message 'Out of Range' displayed on a blank screen. Please change to an input signal which is

compatible with the projector's resolution or set the input signal to a lower setting. See "Timing

chart" on page 69 for details.

Switching input signal

The projector can be connected to multiple devices

at the same time. However, it can only display one

full screen at a time. Press / on the projector

or remote control to select your desired input

signal.

• The input signal type effects the options available

for the Picture Mode. See "Selecting the aspect

ratio" on page 34 for details.

• The native display resolution of this projector is in a 16:10 aspect ratio. For best display

picture results, you should select and use an input signal which outputs at this resolution.

Any other resolutions will be scaled by the projector depending upon the 'aspect ratio'

setting, which may cause some image distortion or loss of picture clarity. See "Selecting the

aspect ratio" on page 34 for details.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 71 72

Sin comentarios

BenQ Joybee GP2 Manual de usuario Pagina 29