BenQ GP3 Manual de usuario descargar pdf (Pagina 43)

Operation

to select a color which is the closest to the color of the projection surface. There are

several precalibrated colors to choose from: Light Yellow, Pink, Light Green, Blue, and

Blackboard.

Fine-tuning the image quality in user mode

According to the detected signal type, there are some user-definable functions available

when User mode is selected. Based on your needs, you can make adjustments to these

functions by highlighting them and pressing / on the projector or remote control.

Adjusting Brightness

The higher the value, the brighter the image. And

the lower the setting, the darker the image.

Adjust this control so the black areas of the

image appear just as black and that detail in the

dark areas is visible.

Adjusting Contrast

The higher the value, the greater the contrast.

Use this to set the peak white level after you

have previously adjusted the Brightness setting

to suit your selected input and viewing

environment.

Adjusting Color

Lower setting produces less saturated colors. If the setting is too high, colors on the image

will be overpowering, which makes the image unrealistic.

Adjusting Tint

The higher the value, the more reddish the picture becomes. The lower the value, the

more greenish the picture becomes.

Adjusting Sharpness

The higher the value, the sharper the picture becomes. The lower the value, the softer the

picture becomes.

Selecting a Color Temperature

There are four options available for color temperature* settings vary according to the

signal type selected.

*About color temperatures:

There are many different shades that are considered to be "white" for various purposes.

One of the common methods of representing white color is known as the “color

temperature”. A white color with a low color temperature appears to be reddish white. A

white color with a high color temperature appears to have more blue in it.

Changing Color Space

In the unlikely event that you connect the projector to a DVD player via the projector's

HDMI input and the projected picture displays wrong colors, please change the color space

to YUV.

1. Press to open the pop-up menu in one of the computer, iPhone/iPod, composite

video, component and HDMI modes.

2. Select Color Space Conversion and press / to select a suitable color space.

This function is only available when the mini HDMI input port is in use.

+50

+30

+70

+30

-30

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 121 122

Comentarios a estos manuales

Sin comentarios

BenQ GP3 Manual de usuario Pagina 43

Comentarios a estos manuales

Relacionado con productos y manuales para Proyectores de datos BenQ GP3