BenQ SX912 Manual de usuario descargar pdf (Pagina 26)

Operation26

Securing the projector

Using a security cable lock

The projector has to be installed in a safe place to prevent theft. Otherwise, purchase a

lock, such as a Kensington lock, to secure the projector. You can locate a Kensington lock

slot on the left side of the projector. See

"Kensington anti-theft lock slot" on page 9

for

details.

A Kensington security cable lock is usually a combination of key(s) and a lock. Refer to the

lock’s documentation for finding out how to use it.

Utilizing the password function

For security purposes and to help prevent unauthorized use, the projector includes an

option for setting up password security. The password can be set through the On-Screen

Display (OSD) menu.

WARNING: You will be inconvenienced if you activate the power-on lock functionality and subsequently forget

the password. Print out this manual (if necessary) and write the password you used in this manual, and keep

the manual in a safe place for later recall.

Setting a password

Once a password has been set, the projector cannot be used unless the correct password is entered every

time the projector is started.

1. Open the OSD menu and go to the System Setup: Advanced > Security

Settings menu. Press MODE/ENTER. The Security Settings page displays.

2. Highlight Change Security Settings and press MODE/ENTER.

3. As pictured to the right, the four arrow keys

(▲, ▼, ◄, ►) respectively represent 4 digits

(1, 2, 3, 4). According to the password you

desire to set, press the arrow keys to enter five

digits for the password.

4. Confirm the new password by re-entering the

new password.

Once the password is set, the OSD menu

returns to the Security Settings page.

5. To activate the Power on Lock function, press

▲/▼ to highlight Power on Lock and press ◄/► to select On.

6. To activate the Web Cont rol Lock function, press ▲/▼ to highlight Web

Control Lock and press ◄/► to select On.

When the Web Control Lock is activated, you have to enter the correct password

to change projector settings via the Projector Network Display System

The digits being input will display as asterisks on-screen. Write your selected password down here in this

manual in advance or right after the password is entered so that it is available to you should you ever forget it.

Password: __ __ __ __ __

Keep this manual in a safe place.

7. To leave the OSD menu, press MENU/EXIT.

INPUT PASSWORD

Back

Downloaded From projector-manual.com BenQ Manuals

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 67 68

Comentarios a estos manuales

Sin comentarios

BenQ SX912 Manual de usuario Pagina 26

Comentarios a estos manuales

Relacionado con productos y manuales para Proyectores de datos BenQ SX912