BenQ SE0224 Guía de usuario descargar pdf (Pagina 24)

 2*+,-

 2*+,- 2*+,-

 2*+,-

After choosing to mirror both ingress and egress traffic of port 2,

I/E

: Ingress/Egress mirror rule Configure, use this function to select mirror

rules of all system. After press [I] or [E] to enter ingress/egress mirror

rule configure, user can see the following items:

• Press “

” to monitor all frames of all ports that are set as Ingress/Egress

ports.(default will mirror all frames of selected ports)

• Select “

” to mirror all Ingress/Egress frames that has specific Destination

MAC Address(Setup in 'M' enter MAC Address) of all ports that be chosen

set as Ingress/Egress ports.

• Select “

” to mirror all Ingress/Egress frames that has specific Source MAC

Address(Setup in 'M' enter MAC Address) of all ports that be chosen as

Ingress/Egress ports.

• Press “

” to setup the MAC Address.

• Press “

” to set Ingress/Egress mirror divider. The value indicates receive/

transmit frames that have passed the device and divided by the value only

one in n frames.

For example, to set ingress mirror rules as " For those mirror ingress ports'

traffic, only mirror those whose SA is 01-02-03-04-05-06. And the mirroring

frequency is to mirror 1 packet for every 100 packets", user should can

follow the below steps: 1. Press [I] to enter ingress rule configure. 2. Press

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 44 45

Sin comentarios

BenQ SE0224 Guía de usuario Pagina 24