Benq FP91G Manual de usuario descargar pdf (Pagina 7)

7 How to install your monitor hardware

2. Connect the video cable.

Connect one end of the DVI-D cable to the monitor

DVI-D socket and the other end to the DVI-D port on

your computer.

The DVI-D format is used for direct digital connection

between source video and digital LCD monitors or

projectors. The digital video signals produce a

superior quality picture than analog video signals.

If you don’t have an appropriate DVI-D port on your

computer, you can use the standard video D-Sub cable.

Connect the plug of the D-Sub cable (at the end without

the ferrite filter) to the monitor D-Sub socket. Connect

the other plug of the D-Sub cable (at the end with the

ferrite filter) to the computer video D-Sub socket.

Tighten all finger screws to prevent the plugs from

accidently falling out during use.

3. Connect the power cable to the monitor.

Plug one end of the power cord into the socket labelled

’POWER IN’ on the rear of the monitor. Do not connect

the other end to a power point just yet.

1 2 3 4 5 6 7 8 9 10 11 12 ... 35 36

Sin comentarios

Benq FP91G Manual de usuario Pagina 7