BenQ SP920P Manual de usuario descargar pdf (Pagina 17)

Connection

English

Connecting a monitor

If you want to view your presentation close-up on a monitor as well as on the screen, you can connect the D-SUB

OUT signal output socket on the projector to an external monitor with a VGA or VGA to DVI-A cable by

following the instructions below.

To connect the projector to a monitor:

The final connection path should be like that shown in the following diagram:

•With a VGA cable: •With a VGA to DVI-A cable:

Your monitor must be equipped with a DVI

input socket.

1. Connect the projector to a computer as described

in "Connecting a computer" on page 16.

The D-SUB output only works when an

appropriate D-SUB input is made to the

projector. Be sure the projector is connecting with

the computer using the D-SUB/COMP. IN

socket, not the DVI-D socket.

1. Connect the projector to a computer as described

in "Connecting a computer" on page 16.

The D-SUB output only works when an

appropriate D-SUB input is made to the

projector. Be sure the projector is connecting with

the computer using the D-SUB/COMP. IN

socket, not the DVI-D socket.

2. Take a suitable VGA cable (only one supplied)

and connect one end of the cable to the D-Sub

input socket of the video monitor.

3. Connect the other end of the cable to the D-SUB

OUT socket on the projector.

2. Take a VGA to DVI-A cable and connect the DVI

end of the cable to the DVI input socket of the

video monitor.

3. Connect the VGA end of the cable to the D-SUB

OUT socket on the projector.

Notebook

or desktop

computer

(VGA)

(DVI)

1. VGA cable

2. VGA to DVI-A cable

2. VGA cable

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 55 56

Comentarios a estos manuales

Sin comentarios

BenQ SP920P Manual de usuario Pagina 17

Comentarios a estos manuales

Relacionado con productos y manuales para Proyectores de datos BenQ SP920P