BenQ PB8253 - XGA DLP Projector Manual de usuario descargar pdf (Pagina 24)

Connection24

Connecting a monitor

If you want to view your presentation close-up on a monitor as well as on the screen, you

can connect the RGB signal output socket on the projector to an external monitor with a

VGA or VGA to DVI-A cable following the instructions below:

To connect the projector to a monitor (either through a VGA cable or VGA to

DVI-A cable):

The final connection path should be like that shown in the following diagram:

The D-Sub output only works when an appropriate D-Sub input is made to the projector. Be

sure the projector is connecting with the computer using the D-Sub/Comp. In socket, not

the DVI socket.

•With a VGA cable: •With a VGA to DVI-A cable:

Note: You monitor must be equipped with a

DVI input socket.

1. Connect the projector to a computer as described in "Connecting a computer" on

page 22.

2. Take a suitable VGA cable (only one

supplied) and connect one end of

the cable to the D-Sub input socket

of the video monitor.

3. Connect the other end of the cable

to the D-Sub Out socket on the

projector.

2. Take a VGA to DVI-A cable and

connect the DVI end of the cable to

the DVI input socket of the video

monitor.

3. Connect the VGA end of the cable to

the D-Sub Out socket on the

projector.

notebook or desktop

computer

VGA to DVI-A

cable

VGA cable

(VGA)

(DVI)

VGA cable

Downloaded From projector-manual.com BenQ Manuals

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 60 61

Sin comentarios

BenQ PB8253 - XGA DLP Projector Manual de usuario Pagina 24