BenQ MW727 Manual de usuario descargar pdf (Pagina 43)

Operation 43

Muting the sound

To temporarily turn off the sound,

• Using the remote control

Press MUTE to temporarily turn off the sound. While the sound is off, the screen will

display in the upper right corner of the screen.

To restore the sound, press MUTE again.

•Using the OSD menu

1. Press MENU/EXIT and then press ◄/► until the System Setup: Advanced

menu is highlighted.

2. Press ▼ to highlight Audio Settings and press MODE/ENTER. The Audio

Settings page displays.

3. Highlight Mute and press ◄/► to select On.

4. To restore the sound, repeat steps 1-3 and press ◄/► to select Off.

Adjusting the sound level

To adjust the sound level,

• Using the remote control

Press or to select a desired sound level.

•Using the OSD menu

1. Repeat steps 1-2 above.

2. Press ▼ to highlight Volum e and press ◄/► to select a desired sound level.

Microphone Volume

To adjust the microphone sound level, press MIC/VOL keys (+/-) on the remote control,

or:

1. Repeat steps 1-2 above.

2. Press ▼ to highlight Microphone Volume and press ◄/► to select a desired

sound level.

Turning off the Power on/off ring tone

1. Repeat steps 1-2 above.

2. Press ▼ to highlight Power on/off ring tone and press ◄/► to select Off.

The only way to change Power on/off ring tone is setting On or Off here. Setting the sound mute

or changing the sound level will not affect the Power on/off ring tone.

Using the test pattern

The projector is capable of displaying the grid test

pattern. It can be used to assist you with the

adjustment of image size and focus, ensuring that the

projected image is free from distortion.

To display the test pattern, open the OSD menu and

go to the System Setup: Advanced > Test

Pattern and press ◄/► to select On.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 75 76

Sin comentarios

BenQ MW727 Manual de usuario Pagina 43