BenQ MP720P - XGA DLP Projector Manual de usuario descargar pdf (Pagina 26)

Connection20

Connecting a monitor

If you want to view your presentation close-up on a monitor as well as on the screen, you

can connect the RGB signal output socket on the projector to an external monitor with a

VGA cable by following the instructions below.

Note: The D-SUB output only works when an appropriate D-SUB input is made to the

projector. Be sure the projector is connecting with the computer using the D-SUB IN

socket, not the DVI socket.

To connect the projector to a monitor (either through a VGA cable or VGA-

DVI cable):

The final connection path should be like that shown in the following diagram:

•With a VGA cable: •With a VGA-DVI cable:

Note: You monitor must be equipped with a

DVI input socket.

1. Connect the projector to a computer as described in "Connecting a computer" on

page 18.

2. Take a suitable VGA cable (only one

supplied) and connect one end of

the cable to the D-Sub input socket

of the video monitor.

3. Connect the other end of the cable

to the D-SUB OUT socket on the

projector.

2. Take a VGA-DVI cable and connect

the DVI end of the cable to the DVI

input socket of the video monitor.

3. Connect the VGA end of the cable to

the D-SUB OUT socket on the

projector.

notebook or desktop computer

VGA cableVGA-DVI cable

VGA cable

(VGA)

(DVI)

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 60 61

Sin comentarios

BenQ MP720P - XGA DLP Projector Manual de usuario Pagina 26