BenQ MP510 - SVGA DLP Projector Manual de usuario descargar pdf (Pagina 43)

Maintenance 43

5. Disconnect the lamp connector by

pushing it against the projector while

pulling it up.

6. Loosen the screw that secures the lamp.

7. Lift the handle so that it stands up. Use the

handle to slowly pull the lamp out of the

projector.

• Pulling it too quickly may cause the lamp to

break and scatter broken glass in the projector.

• Do not place the lamp in locations where water

might splash on it, children can reach it, or

near flammable materials.

• Do not insert your hands into the projector

after the lamp is removed. If you touch the

optical components inside, it could cause color

unevenness and distortion of the projected

pictures.

8. As shown in the figure, hold the new lamp

first and align the lamp with the

compartment in the projector, and then insert

the lamp all the way into the projector.

9. Tighten the screw that secures the lamp.

• Loose screw may cause a bad connection,

which could result in malfunction.

• Do not over tighten the screw.

10. Connect the lamp connector to the projector.

11. Place the lamp cords back to the slots.

Downloaded From projector-manual.com BenQ Manuals

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 49 50 51

Comentarios a estos manuales

Sin comentarios